[ConnecticutYankee]

We have an orange stain at the base of our shower doors and along the corners of the shower floor. They are not from soaps or shampoos. They wash away with cleaning, but reappear. Anyone have any ideas what this could be?

[lovinganimals]

I may be wrong, but I believe it is some type of mildew or from the type of water. I always had it up north too -in CT also Like you said, it goes away with cleaning so I never worried about it.

[graciegirl]

Originally Posted by ConnecticutYankee

We have an orange stain at the base of our shower doors and along the corners of the shower floor. They are not from soaps or shampoos. They wash away with cleaning, but reappear. Anyone have any ideas what this could be?

It is some sort of microorganism, a mold probably, that loves dark, wet areas. It WILL be back. It is deterred with bleach and brushing, but hard to say an absolute good bye too. The high humidity in the shower helps it grow too. Sometimes squirting bleach spray after the shower helps. Wiping the shower down to dry does too. Not too many takers on that. Running your exhaust fan for awhile after the shower helps too. Mostly we shower, and run to the next activity. I don't think it is a mold that can harm you, just not pretty.

[Indydealmaker]

One way to avoid mold is to keep the area dry. (I know this is impossible in the shower) Rustoleum has a new product called Never Wet.

It is based upon nanotechnology and once applied keeps the coated area from getting wet even when rained on or sprayed with water. Looks kind of neat.

Here is a website:
NeverWet Liquid Repelling Treatment

[jnieman]

we get that orange slime in our toilets. I use a bleach tablet in the tank and it works. So someone's suggestion of spraying a little bleach water in the shower may work.

[BobandMarilyn]

Originally Posted by ConnecticutYankee

We have an orange stain at the base of our shower doors and along the corners of the shower floor. They are not from soaps or shampoos. They wash away with cleaning, but reappear. Anyone have any ideas what this could be?

We have been very successful controlling mold with Mold Armor. It is sold in the paint department at Home Depot. Look for the combination mold cleaner and blocker. I spray the shower walls and floor every 2 months. Let set for a few minutes and rinse. It does not have an obnoxious smell, and we have not had mold in the shower for 3 years. I should also squeegee the shower to speed up the drying process, but am too lazy to much of the time.

[mulligan]

Originally Posted by jnieman

we get that orange slime in our toilets. I use a bleach tablet in the tank and it works. So someone's suggestion of spraying a little bleach water in the shower may work.

Keep a close eye on the flush valve and related parts. Chlorine bleach will cause them to deteriorate fairly quickly.

[cquick]

It is definately Mildew or mold....use a cleaner with bleach.

[cquick]

Originally Posted by jnieman

we get that orange slime in our toilets. I use a bleach tablet in the tank and it works. So someone's suggestion of spraying a little bleach water in the shower may work.

I used to use the bleach tabs in the tank, but I read that the new "innards" don't hold up well to them. They do work like a charm!

[kbace6]

Originally Posted by Indydealmaker

One way to avoid mold is to keep the area dry. (I know this is impossible in the shower) Rustoleum has a new product called Never Wet.

It is based upon nanotechnology and once applied keeps the coated area from getting wet even when rained on or sprayed with water. Looks kind of neat.

Here is a website:
NeverWet Liquid Repelling Treatment

I looked into this for my river rock shower floor. I'm glad I read the fine print, because it would have been a waste of my money for use in the shower. Here is a quote from the Use and Care section of the "Never Wet" instructions.

A treated surface should not be exposed to detergents, soap, oil solvents. Even excessive handling by human skin (due to the oil in our skin) can cause a reduction of performance.

[ConnecticutYankee]

Originally Posted by BobandMarilyn

We have been very successful controlling mold with Mold Armor. It is sold in the paint department at Home Depot. Look for the combination mold cleaner and blocker. I spray the shower walls and floor every 2 months. Let set for a few minutes and rinse. It does not have an obnoxious smell, and we have not had mold in the shower for 3 years. I should also squeegee the shower to speed up the drying process, but am too lazy to much of the time.

Thanks for the suggestions......this may be the answer. We do squeegee after each shower. The mold only appears at the base of the glass on the doors and in the track. Using the fan helps too.

Thanks everyone for your help!

[dotti105]

I have seen recommendations here to install a solar tube over the shower.
The light is supposed to help prevent the mold from forming. Anyone out there with more info on this.
We had thought that would be one of the first things we do....if I see enough feedback that it works. I know mold hates sunlight.

[RiteLucky]

Like BobandMarilyn, I use Mold Armor on the floor of my shower. I spray it on, leave the room for 10 minutes, then rinse -- that orange stain is gone! It looks beautiful and cleaner than anything else I've tried, including clorox!

[Count'n the days]

My friend used the chlorine tank tabs in her upstairs toilet - BIG MISTAKE! I assume the chlorine deteriorated the seal which caused the water to overflow. They had been out for several hours on a holiday and returned to find water pouring through the ceiling into their downstairs dining room, office and master bath. Luckily they had only been gone for the evening and not longer. It was also a huge ordeal when they filed their insurance claim.

[Bogie Shooter]

Serratia bacteria are common inhabitants of our environment and can be found in many places, including
human and animal feces, dust, soil, and in surface waters. The bacteria will grow in any moist location where
phosphorous containing materials or fatty substances accumulate. Sources of these substances include soap
residues in bathing areas, feces in toilets, soap and food residues in pet water dishes. Many times, the pinkish
film appears during and after new construction or remodeling activities. Others have indicated the pink �stuff�
occurs during a time of year that their windows are open for the majority of the day.
These airborne bacteria can come from any number of naturally occurring sources, and the condition can be
further aggravated if customers remove the chlorine from their water by way of an activated carbon filter.
Serratia can also grow in tap water in locations such as toilets in guest bathrooms where the water is left
standing long enough for the chlorine residual disinfectant to dissipate. Serratia will not survive in chlorinated
drinking water.
Serratia marsescens is not known to cause any waterborne diseases. Members of the Serratia genus were
once known as harmless organisms that produced a characteristic red pigment. More recently, Serratia
marcescens has been found to be pathogenic to some people, having been identified as a cause of urinary tract
infections, wound infections, and pneumonia in hospital environments.
Once established, the organism usually cannot be eliminated entirely. However, periodic and thorough cleaning
of the surfaces where the pink slime occurs, followed by disinfection with chlorine bleach appear to be the best
way to control it.